Category: Guns and Rifles

Guns and Rifles , , , ,

Evike CYMA Contractor AK Airsoft AEG Rifle – (39122) Review

by AngerDaemon June 6, 2018 No Comments

Evike CYMA Contractor AK Airsoft AEG Rifle - (39122)

    This fits your .
  • Make sure this fits by entering your model number.

  • *Completely pre-built, this Airsoft gun is NOT separate parts and is a fully built Airsoft gun; No parts of this Airsoft gun was designed for use on real weapons. Batteries, optics, and accessories not included unless explicitly stated in the description. Gun ships with blaze orange flash hider to meet US regulations*
  • Nylon fiber polymer RIS handguard, motor grip, and stock
  • Adjustable front and rear sights
  • Front rails perfect for tactical accessories
  • AK folding vertical grip included
  • Muzzle Velocity: 380~400 FPS (Measured with 0.20g BBs)
  • Please make sure to carefully read the description and double check; unless explicitly listed, optics, grips, and other accessories are NOT included by default. They are mostly for visual enhancement and to display how the Airsoft gun will appear when fully equipped

Features:
• High strength polymer receiver
• Nylon fiber polymer RIS handguard, motor grip, and stock
• Adjustable front and rear sights
• Retractable M4 stock
• Front rails perfect for tactical accessories
• Sling mount at rear of receiver
• AK folding vertical grip included

Length: 855mm-935mm, Adjustable
Inner Barrel: 455mm
Magazine Capacity: 600 rounds
Muzzle Velocity: 380~400 FPS (Measured with 0.20g BBs)
Gearbox: Full Metal Ver 3, Fully Upgradeable
Motor: Short Type
Fire Modes: Fully Automatic, Semi-Auto, Safety
Battery: 8.4v Stick Type or 7.4v small LiPo recommended (Battery & charger not included)
Hopup: Yes, Adjustable
Package Includes: Gun, Magazine, Vertical Grip

Manufacturer: CYMA

Guns and Rifles , , , ,

CYMA AEG Plastic Gear AK-47 Airsoft Gun Review

by AngerDaemon June 6, 2018 No Comments

CYMA AEG Plastic Gear AK-47 Airsoft Gun

    This fits your .
  • Make sure this fits by entering your model number.

  • 200 fps w/ 0.12g BBs
  • 500 rd. Hi-Cap Magazine
  • Rechargeable 7.2V 700mah Battery & Charger included
  • 1.9 lbs gun net weight
  • 34.4″ overall length

SPECIFICATIONS
200 fps w/ 0.12g BBs
500 rd. Hi-Cap Magazine
Rechargeable 7.2V 700mah Battery & Charger included
1.9 lbs gun net weight
34.4″ overall length

Guns and Rifles , , , ,

Beeman P1 Stainless Look Air Pistol air pistol Review

by AngerDaemon June 6, 2018 No Comments

Beeman P1 Stainless Look Air Pistol air pistol

    This fits your .
  • Make sure this fits by entering your model number.

  • caliber: 0.177
  • velocity: 600.00 ft/sec
  • Warranty: One year limited warranty
  • Overlever Spring-Piston, 1911 Lookalike

Beeman P1 Stainless look & black finish Spring-piston Overlever Single-shot Manual safety 14mm optics dovetails* 2-stage adjustable trigger Checkered plastic grips Fixed front sight Rear sight adj. for windage & elevation 2 power levels *The dovetail grooves are extra wide, and our accessory list has several 11mm to 14mm mounts that are known to fit…. …

Guns and Rifles , , , ,

Echo1 A.S.R Airsoft Spring Sniper Rifle w/Bipod airsoft gun Review

by AngerDaemon June 6, 2018 No Comments

Echo1 A.S.R Airsoft Spring Sniper Rifle w/Bipod airsoft gun

    This fits your .
  • Make sure this fits by entering your model number.

  • caliber: 6mm
  • velocity: 470.00 ft/sec
  • Warranty: 30 Day Limited Warranty
  • Mod4 LE stock and pistol grip

The Echo1 A.S.R Airsoft Spring Sniper Rifle is a weapon that will strike fear into opponents on the battlefield. This spring-powered gun features a 22 Rd magazine, a shot velocity of 460-470 fps (using .20g BBs) and 420-440 fps (using .25g BBs), and a metal rail for mounting optional rifle scopes. The rifle also comes with a detachable metal bipod for increased shot accuracy. Airgunners will enjoy the ease of use and excellent firing power of this awesome rifle. Take aim and fire today! The Echo1 A.S.R Airsoft Spring Sniper Rifle includes three magazines, bipod, speedloader, two allen keys, and cleaning rod. Features: Bolt-action Adjustable Hop-Up Model 4 LE stock and pistol grip Metal barrel and bolt assembly … …

Guns and Rifles , , , ,

kjw 1911 meu kp07 gas blowback gun(Airsoft Gun) Review

by AngerDaemon June 6, 2018 No Comments

kjw 1911 meu kp07 gas blowback gun(Airsoft Gun)

    This fits your .
  • Make sure this fits by entering your model number.

  • Green Gas Powered, Full Metal Construction
  • Blow Back Technology, 27 RD Magazine
  • FPS: 375, Magazine Capacity: 27 RDs
  • Size: 13 x 7 x 3, (in) Weight: 2.4 lbs

If you’re looking for a serious Airsoft pistol then you need to go with this green gas pistol. And what better green gas Airsoft pistol than the Green Gas KJW KP-07 K1911 M.E.U Pistol Airsoft Gun! With fire power of 375 FPS this Airsoft pistol isn’t for the faint of heart. The full metal body makes the gun feel solid and gives it a realistic weight. The KJW KP-07 K1911 M.E.U fires in semi automatic and features blowback, a working hammer and slide lock so the slide will move back and forth when the gun is fired and will lock open when all the BB’s in the magazine are fired making it one of the most realistic Airsoft guns out there. So if you’re looking for a great green gas gun then do yourself a favor and get the Green Gas KJW KP-07 K1911 M.E.U Pistol Airsoft Gun today!

Guns and Rifles , , , ,

G&G CM16 ARP-9 CQB 6mm AEG Airsoft LiPo Battery & Charger Combo w/ MOSFET Review

by AngerDaemon June 5, 2018 No Comments

G&G CM16 ARP-9 CQB 6mm AEG Airsoft LiPo Battery & Charger Combo w/ MOSFET

    This fits your .
  • Make sure this fits by entering your model number.

  • 330 – 350 FPS
  • 300 Round High-Capacity Magazine
  • 5″ Milspec M-Lok Rail
  • Pre-Installed Mosfet and ETU (Electronic Trigger Unit)
  • 11.1v 800 / 1000mAh LiPo Battery and Charger Included (Brand May Vary)

If you are looking for a new unique primary then look no further, G&G has got you covered! The G&G CM16 ARP9 airsoft gun utilizes its polymer construction and compact form to make it light to carry while remaining tough through rigid conditions. Toward the rear you will notice that G&G has installed a retractable PDW style stock that can fit a 11.1v LiPo battery. On the front rests a 5″ Milspec M-lok rail with areas to attach rail segments to install the accessories needed to optimize your airsoft gun to its maximum potential. Across the top section is a monolithic standard rail system that provides plenty of space for an optic and the included flip up sights. Included with the ARP9 is a crown amplifier that has an aggressive design in mind. In addition to all these great features, G&G has an installed pre-programmed MOSFET chip that is able to stop batteries such as a Li-Po from over discharging and becoming damaged. The MOSFET is also programmable to shoot from full auto to 3-round burst. G&G has also installed an electronic trigger unit that increases response and assists in preventing trigger burns or locks in rapid semi-auto firing.

Guns and Rifles , , , ,

Evike – CYMA M3 3-Round Burst Multi-Shot Shell Loading Airsoft Shotgun (Size and Style options) Review

by AngerDaemon June 5, 2018 No Comments

Evike - CYMA M3 3-Round Burst Multi-Shot Shell Loading Airsoft Shotgun (Size and Style options)

  • *Pre-built: This Airsoft Gun is built with parts that are not meant for use on real weapons. Batteries, scopes, and other accessories not included unless stated in the description.*
  • Pump action design, each pump chambers three rounds
  • Tri-shot design fires three BBs with each trigger pull
  • Ideal for CQB scenarios
  • *Remember to check the description for more information, including if batteries and chargers are included. Unless explicitly stated, most accessories are not included by default.*

Redesigned from the Tokyo Marui M3 shotgun, the CYMA M3 is built to shoot harder for the performance driven American market! CYMA set out to capture this iconic shtogun in the form of a reinforced, reliable, powerful, and accurate Airsoft version. There is no reinventing the wheel here, the CYMA M3 series uses the tried and true tri-shot design but with beefier and more durable internals and the fine exterior appearance that CYMA is known for. Airsofters have been asking for it and CYMA has delivered, a skirmish grade tri-shot M3 Airsoft shotgun with a very attractive price tag. The CYMA 3-round burst shotgun is perfect for those looking for manual backup weapon. Remember to pick up some spare shotgun shells along with it!

Magazine Capacity: 30rds per Shell (takes Evike/Marui/CYMA 14 round type or 30 round type shells)
BB: 0.12, 0.20, or 0.23g bbs. Matrix or high grade compatible bbs recommended
Body Finish: Matt Black none-glare finish
Muzzle Velocity: 280~350 FPS (Measured with 0.20g BBs)
Fire Modes: 3-Round Burst, Safety
System: Realistic Pump Action / 3 Round Burst. No gas or battery required
Package Includes: Gun, Magazine, Shell
Hopup: Yes, Fixed / Non-Adjustable

Manufacturer: CYMA. Matrix: USA Distribution

Guns and Rifles , , , ,

hfc model-118b m9 heavy weight spring pistol / black(Airsoft Gun) Review

by AngerDaemon June 5, 2018 No Comments

hfc model-118b m9 heavy weight spring pistol / black(Airsoft Gun)

    This fits your .
  • Make sure this fits by entering your model number.

  • Magazine:SP-118-MAG
  • Capacity: 17 rds/ Velocity:250 fps
  • It is an airsoft product. This product is restricted from shipment into the state of New York
  • Currently, item can be shipped only within the U.S., excluding certain cities and states.
  • Buyer must be over 18 years old

© 2024

High Quality Airsoft Equipment Solution (airsoftequipment.readyto.top) is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com, or endless.com, MYHABIT.com, SmallParts.com, or AmazonWireless.com.

High Quality Airsoft Equipment Solution | Designed by: Theme Freesia | Powered by: WordPress
Top