Tag: m1surplus

M1Surplus Adapter Rail Mount – Made from durable Aluminum Material, Matte black color, This adapter allows you to convert your 3/8″ dovetail equipped rifle or marker to accept industry standard 7/8″ Weaver and Picatinny style scopes or accessories. Provides a 3.94″ long Picatinny style rail with cross slots. Easy installation requires no modifications. Brand new item

( FEATURES OF DOT SIGHT ) – Unlimited eye relief, Black anodized aluminum construction, Three brightness settings for the Red and Green dots, 30mm Cantilever Weaver Style Mount for mounting onto most Weaver Style/Picatinny mounts, Red Green and Blue LEDs (Light Emitting Diode) consumbes very little power and is very durable, Length: 5.0 inches, Width: 2.7 inches, Height: 3.1 inches, Weight: 8.9 oz, Mount Length: 2.68 inches, Objective Lens Diameter: 35mm, Magnification: 1x, Reticle: Red and Green Dots, Dot Size: 3 MOA, Click Value: 1 MOA, Lens Coating: Platinum, Battery Type: CR2032 – ( FEATURES OF FLIP-UP POLYMER SIGHTS) – Material: Durable synthetic material, Color: Matte Black, Easy bolt-on installation, Fits most Weaver/Picatinny rails, Includes front and rear sight. Both are made from durable synthetic polymer and are a good option when seeking a backup aiming sight. Will fit most any Weaver/Picatinny mounts. Sights pop into action quickly and will stay folded down securely when not in use. Tools-Less design allows both both Front and Rear sight to be adjusted by hand. Rear sight has dual aiming apertures ( large peep hole and small peep hole ). Note that both the front and rear sight are on the same height plane. Industry standard height of 1-1/2 inches from the bottom of the sight to the tip of the front aiming post. Both rails sit on the same height plane. Brand new with manufacture warranty

( Item# 1 ) : Trinity 1-4×28 Tactical illuminated Rifle Scope – Made by Trinity Made from durable aluminum Anodized matte black finish Scope Magnification: 1x – 4x ( variable power ) Tube Diameter: 30mm Objective: 28mm Eye Relief: 4.2″ Exit Pupil: 13.4 – 4.4 mm FOV (feet at 100 yds.): 112 – 25.5 M.O.A.: 1/2 Finish: Matte Black Lens Coating: Green Battery: CR2032 Length: 10.5 inches Weight: 17.8 oz Fog proof and Shock-Resistant housing – MilDot reticle with red and green color illumination. The illuminator has adjustable brightness settings Reticle is not battery dependent and is visible in black color when the illuminator is turned off Includes tactical flip up lens covers, lens polishing cloth and battery Rated to handle recoil up to 223 caliber ( 5.56mm) ( Item# 2 ) : Trinity Tactical Backup Aiming Micro Size Dot Sight – Made from aluminum Anodized matte black finish Magnification: Non-magnified as it’s intended for fast target acquisition and can be used with both eyes open Unlimited eye relief provides multiple mounting options Integral mount fits most Weaver/Picatinny rails Objective Aperture: 23.5 X 16.8 Click Value @ 100 yds: 1 MOA Dot size: 3 MOA ( dot size can vary depending on battery power ) Length: 1.85″ Weight: 1.4 oz. Rated to handle recoil up to 223 caliber ( 5.56mm) ( Item# 3 ) : Trinity Tactical Scope Mount – Made from aluminum Anodized matte black finish 1″ saddle height Short top rail for attaching small accessories, Will fit most Weaver / Picatinny style rails, Simple And Rugged Bolt-on Scope Mount, It’s good gunsmith practice to use a thread locking compound such as loc-tite on all the screws to prevent things from coming loose after being subject to constant shock, recoil and heat, ( Thread locking compound is Not included ) All items are Brand New w/ Full Manufacture Warranty Against Defects

Material: Aluminum Anodized matte black finish, Length: 5.4 inches, Height: 0.36, Weight: 1.0 oz 2nd Generation mount Made from aluminum, Built to withstand heavy recoil, 7/8 inch wide weaver style rail, will accept most scope rings Center see-through channel allows the use of most of the iron sights. This mount will fit Marlin rifles with a flat top receiver that have been drilled and tapped at the factory for a scope mount. Note some older model Marlin rifles may Not have been drilled or tapped at the factory for a scope mount. Includes allen head screws that will fasten directly on to your rifle. Fits the following Marlin rifles 992M, 989, .22, 9, 45, 30AS, 30AW, 36, 62, 93, 336, 336C, 375, 444, 1993, 1894 Cowboy, 1895, Mossberg 640, Western Field 740, Glenfield 30, Zane Grey, Camp-9 Carbine. With this mount you can attach most scopes, red dots and reflex sights to your Marlin rifle. Brand New w/ Full Manufacture Warranty